RESIDENTIAL HEATED ROOFS

Tired of climbing up to your roof to clear snow and ice? Worried about leaks caused by ice damming? Our snow melting systems, manufactured custom for every roof, ensure that you never need to worry about snow and ice causing damage to your home! Our mats are made to fit any home and can be used on an existing roof OR a new roof

Heated Valley Snow/Ice Melt Mats

Prevent Excessive Snow Load

  • 24″ WIDE EPDM HEATED MAT
  • PREVENTS BUILDUPS OF SNOW AND ICE IN HARD-TO-MELT AREAS BY MELTING UP TO 4″ OF SNOW PER HOUR
  • CAN BE LAID ON TOP OF AN EXISTING ROOF OR UNDER A NEW ROOF

Heated Drip Edge Snow/Ice Melt Mats

Dealing With Damming, Drifts, And Piles

  • 24″ OR 12″ WIDE EPDM HEATED MAT
  • ENSURES COMPLETE ICE REMOVAL FROM VULNERABLE EDGES
  • WORKS TO CLEAR PILES FROM UNDER OVERHANGS
  • CLEARS LARGE DRIFTS FROM WINDSWEPT AREAS

Heated Shingle Snow/Ice Melt Mats

For Shingle Roofs

  • 24″ OR 12″ WIDE EPDM HEATED MAT
  • PREVENTS ICE DAMMING THAT LEADS TO INTERIOR SOAKING & ROOF DAMAGE
  • INSTALL ON EXISTING SHINGLE ROOFS BY LIFTING ROW OF SHINGLES AND SLIDING MAT UNDERNEATH

Heated Gutter Snow/Ice Melt Mats

Keeping The Runoff Flowing

  • 5″WIDE EPDM HEATED MAT
  • WORKS TO KEEP RUNOFF WATER FROM REFREEZING AND RIPPING YOUR GUTTERS DOWN
  • ENSURES THAT MELTED SNOW AND ICE REMOVED FROM YOUR ROOF COMPLETELY

Heated Trace Cable

Clearing Your Downspouts

  • RUNS THROUGH DOWNSPOUTS IN ORDER TO GIVE RUNOFF AN OPEN PATH DOWN TO THE GROUND
  • ENSURES ICE WON’T CAUSE A POTENTIALLY CATASTROPHIC BACKUP INTO YOUR GUTTER

Controlling Your System

Ditch The Switch

We offer a controller with precipitation and temperature sensors that will turn your system On/Off for you automatically without the need for a manual switch

POWER - OPTIONS & REQUIREMENTS

220V / 1PH

– 15″ Wide Mat: 0.11 A/ln ft

– 24″ Wide Mat: 0.16 A/ln ft.

110V / 1PH

– 5″ Wide Mat: 0.11 A/ln ft.

– 12″ Wide Mat: 0.18 A/ln ft.

– 24″ Wide Mat: 0.36 A/ln ft.

Our Lineup Of Commercial Products

General Purpose Mats

ROOF DRAIN & SCUPPER MATS:

DRIP EDGE MATS:

HEAT TRACE CABLE:

CONTROLLER:

SYSTEM ACCESSORIES

Mats can be daisy-chained together up to 16 amps during manufacturing to help cut down on the number of lead cords

Lead cords can be manufactured to your required length and made for either a direct tie-in or a plug

We offer Double-Sided Adhesive Tape for easy installation and waterproofing

Control Panels may be mounted indoors in order to monitor and manually control your system

1000

+

Project Done

13

+

Exprience

1000

+

Business Partners

With over a decade of business our name has become the industry standard for heated roof systems

Let Us Know What You Need!

    What We Do For You

    1) We’ll walk with you through the process of designing a layout for your roof

    2) Once we have a layout that you’re happy with we’ll give you a final quote

    3) When you’re ready to order we’ll send you an invoice that you can pay by card or by check

    4) Your system is ready to be manufactured! Orders typically ship within 2 weeks of when we receive payment

    Note – Our Engineers Will Work With You To Design Your System Free Of Charge! You Don’t Pay A Dime Until You’re Ready To Buy.